Model FCDC, "direct coupling, friction type torque limiter", limit the output of the drive through the friction coefficient of non-asbestos disc applied against the faces of the bearing mounted drive component. The range of transmitted torque is varied by a hexagonal nut applying force to a spring which in turn applies force to the friction discs. During an overload condition, the torque limiter transmits up to the preset value of torque and then allows the output to slip or stop until the overload condition has been corrected. They are built to directly couple the input to the out shafts. They are shipped ready to use. Set the torque and install on your drive. When the driven load exceeds the spring and friction pressure on the non-asbestos facings, the clutch will slip and not re-engage until the overload is removed. Available options include: heat treated teeth and shafts for improved wear, needle roller bearings for ultra smooth slip, delrin clutch facings for smooth slip or drags, as well as any OD or LOA modifications necessary for the space available. We will fully customize our product to the needs required for any application.
1 - 25 of 26 | Results Per Page | View | Unit of Measure
1 2 

P/N

Torque (Adjustable Up To)

Bore Size A

Bore Size B

2FCDC - 1/2 x1/2" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 1/2 Inch N/A 1/2 Inch
2FCDC - 1/2 x 5/8" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 1/2 Inch N/A 5/8 Inch
2FCDC - 5/8 x 5/8" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 5/8 Inch N/A 5/8 Inch
2FCDC - 5/8 x 3/4" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 5/8 Inch N/A 3/4 Inch
2FCDC - 3/4 x 3/4" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 3/4 Inch N/A 3/4 Inch
2FCDC - 3/4SQ x 3/4SQ" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 3/4 Inch N/A 3/4 Inch
2FCDC - 3/4 x .85 N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 3/4 Inch N/A 0.850 Inch
2FCDC- 3/4 x 1" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 3/4 Inch N/A 1 Inch
2FCDC- 3/4" x 20MM N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 3/4 Inch N/A 20 mm
2FCDC-3/4x7/8" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 3/4 Inch N/A 7/8 Inch
2FCDC-7/8x7/8" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 7/8 Inch N/A 7/8 Inch
2FCDC-7/8x 1" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 7/8 Inch N/A 1 Inch
2FCDC-20MM x 20MM N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 20 mm N/A 20 mm
2FCDC-20MM x 20MM SS N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 20 mm N/A 20 mm
2FCDC-20MM x 20MM EN N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 20 mm N/A 20 mm
2FCDC-20MM x 25MM N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 20 mm N/A 25 mm
2FCDC-20MM x 25MM EN N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 20 mm N/A 25 mm
2FCDC-20MM x 25MM SS N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 20 mm N/A 25 mm
2FCDC-25MM x 25MM N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 25 mm N/A 25 mm
2FCDC-25MM x 25MM EN N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 25 mm N/A 25 mm
2FCDC-25MM x 25MM SS N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 25 mm N/A 25 mm
2FCDC-1 x 1" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 1 Inch N/A 1 Inch
2FCDC-1 x 1"-2S N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 1 Inch N/A 1 Inch
2FCDC-1 x 1"-3S N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 1 Inch N/A 1 Inch
2FCDC-1 x 1-1/8" N/A 1 spring up to 75 ft-lbs 2 springs up to 150 ft-lbs N/A 1 Inch N/A 1-1/8 Inch
1 - 25 of 26 | Results Per Page | View | Unit of Measure
1 2